New About Yours API Help
3.1 KB, Plain text
sebastian@ubuntu-sebastian:~$ lspci -vv -s 04:06.0 
04:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
	Subsystem: TERRATEC Electronic GmbH Cinergy 1200 DVB-C (MK3)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (3750ns min, 9500ns max)
	Interrupt: pin A routed to IRQ 21
	NUMA node: 0
	Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=512]
	Kernel driver in use: budget_av
	Kernel modules: budget_av

sebastian@ubuntu-sebastian:~$ dvbtune -f 682000000 -s 6952 -qam 256
Using DVB card "Philips TDA10023 DVB-C"
tuning DVB-C to 682000000, srate=6952000
polling....
Getting frontend event
FE_STATUS:
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
Bit error rate: 1048575
Signal strength: 55512
SNR: 62708
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC
sebastian@ubuntu-sebastian:~$ timeout 1 dvbsnoop -s bandwidth 8190 -n 80000
dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ 

---------------------------------------------------------
PID bandwidth statistics...
PID: 8190 (0x1ffe)   - max packet count: 80000 
---------------------------------------------------------
## PID: 8190 (0x1ffe)   bad/total packets: 0/0 (= -nan%)   Avrg:     0.000 kbit/s
... aborted (Signal: 15)
sebastian@ubuntu-sebastian:~$ dvbsnoop -s bandwidth 8190 -n 80000
dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ 

---------------------------------------------------------
PID bandwidth statistics...
PID: 8190 (0x1ffe)   - max packet count: 80000 
---------------------------------------------------------
^C
sebastian@ubuntu-sebastian:~$ dvbsnoop -s feinfo
dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ 

---------------------------------------------------------
FrontEnd Info...
---------------------------------------------------------

Device: /dev/dvb/adapter0/frontend0

Basic capabilities:
    Name: "Philips TDA10023 DVB-C"
    Frontend-type:       QAM (DVB-C)
    Frequency (min):     47000.000 kHz
    Frequency (max):     862000.000 kHz
    Frequency stepsiz:   62.500 kHz
    Frequency tolerance: 0.000 kHz
    Symbol rate (min):     0.451875 MSym/s
    Symbol rate (max):     7.230000 MSym/s
    Symbol rate tolerance: 0 ppm
    Notifier delay: 0 ms
    Frontend capabilities:
        auto inversion
        FEC AUTO
        QPSK
        QAM 16
        QAM 32
        QAM 64
        QAM 128
        QAM 256

Current parameters:
    Frequency:  682000.000 kHz
    Inversion:  ON
    Symbol rate:  6.952000 MSym/s
    FEC:  none
    Modulation:  QAM 256

sebastian@ubuntu-sebastian:~$ dvbsnoop -s pidscan
dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ 

---------------------------------------------------------
Transponder PID-Scan...
---------------------------------------------------------
sebastian@ubuntu-sebastian:~$
Pasted 3 months, 3 weeks ago — Expires in 253 days
URL: http://dpaste.com/2TNNY8Z